“As a commercial masonry foreman, I have worked extensively installing Rmax as well as other polyiso systems. Once our insulation installers had completed their work there was usually a lapse in time before our masons installed the veneer. With the other systems I was constantly finding myself having to monitor the vapor barrier, inspecting the seam tapes and having to fix fish mouths and puckers. With the ECOMAXci™ Wall Solution including R-SEAL 6000 flashing, even with extensive time exposed to the elements, I found that the seams were still flat and providing a watertight seal. I have now taken an estimation position with a new company and I’m always trying to push the ECOMAXci™ system over their competitors. My field experience has given me the utmost confidence in a system that when installed properly will not result in expensive call backs.”
— Edgar Boettcher, Atlantic Coast Waterproofing

A Better Insulation Solution.

ECOMAXci™ Wall Solution for Commercial Exterior Walls

Rodenhouse Fasteners being used to attach Rmax ECOMAXci Wall Solution.

Rmax ECOMAXci™ is installed continuously to reduce thermal bridging and meet R-value requirements with a thinner profile. This wall solution blocks air and moisture and is lightweight and easy to install - all contributing to overall savings. Combined with Rmax tape and flashing, this solution has been tested to meet stringent fire code requirements as well as air and water barrier standards for the most effective, efficient building envelope design.

 

Why Specify ECOMAXci™ Wall Solution

  • Satisfies ASHRAE 90.1 and IECC continuous insulation (c.i.) requirements
  • 15-year limited thermal warranty
  • Easy, efficient installation
  • Lightweight, easy-to-handle materials
  • Meets R-value requirements with a thinner profile than XPS
  • 25 psi compressive strength
  • Mold resistant, reflective facer acts as a radiant barrier
  • Helps qualify for LEED credits
  • Utilizes a CFC-, HCFC- and HFC- free blowing agent that has zero Ozone Depletion Potential (ODP) and negligible Global Warming Potential (GWP)

WHY ECOMAXCI™ WALL SOLUTION Makes Sense

  • Engineered to optimize performance
  • Tested as an assembly
  • Meets current building codes with respect to c.i., fire, air and water
  • Meets NFPA 285 fire performance criteria without exterior gypsum board or fire-stopping at header openings
  • Meets ABAA criteria for an Air Barrier Assembly
  • Flexibility in cavity insulation
  • Material savings are achieved by eliminating secondary barriers (fire, air water)
  • Faster dry-in time
  • Covered by the ECOMAXci™ Wall Solution limited warranties
  • The only insulation/sheathing approved for the High Velocity Hurricane Zone system, R-Trac (HVHZ)

ECOMAXCI™ WALL Solution INCLUDES:

  • ECOMAXci™ thermal insulation board
  • Rmax R-SEAL 3000 tape and R-SEAL 6000 flashing

Together, these elements have been tested to meet fire performance, air infiltration and moisture resistance standards for a more effective, efficient building envelope design.


Multiple Design Options 

The approval of NFPA 285 assemblies with ECOMAXci Wall Solution allows for ultimate efficiency through multiple design options, ease of construction, a better building envelope and reduced energy usage. With a direct impact on the savings throughout the life of the building, ECOMAXci Wall Solution is the superior choice for commercial buildings. 

                          Brick Veneer

                          Brick Veneer

           Metal Panel, MCM or ACM Veneer

           Metal Panel, MCM or ACM Veneer

                               Stucco

                               Stucco


Thermal Properties

Typical Physical Properties

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101.  NOTE: EVOMAXci™ is shipped in bundles that are approximately 48 inches high and wrapped in plastic for easy handling.

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101. 
NOTE: EVOMAXci™ is shipped in bundles that are approximately 48 inches high and wrapped in plastic for easy handling.

1Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of EVOMAXci™ and related components under actual fire conditions.

1Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of EVOMAXci™ and related components under actual fire conditions.

Compliances and Testing