Rmax TSX-8510
Continuous Insulation for Exposed Use

Just like TSX-8500, this product is designed for use without a thermal barrier (up to 4.5” on walls or 12” on ceilings) to provide an attractive interior finish. The difference is that the exposed side of TSX-8510 has a heavy 12mil white aluminum surface.

 
Rmax TSX-8510 Compliances

CONSTRUCTION APPLICATIONS

  • Masonry construction
  • Stud construction
  • Farm or storage buildings
  • Pre-engineered metal buildings
  • Parking structures
  • Laminate panels and other similar applications 
                                       Masonry Wall Application

                                       Masonry Wall Application


THERMAL PROPERTIES

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101.  2Includes the ASHRAE assigned 2.77 R-value of a ¾ inch air tight space against a reflective foil in a typical wall assembly. Assumes air tight space is against silver, reflective surface.

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101. 
2Includes the ASHRAE assigned 2.77 R-value of a ¾ inch air tight space against a reflective foil in a typical wall assembly. Assumes air tight space is against silver, reflective surface.

TYPICAL PHYSICAL PROPERTIES

1Less than 1” is only available at 16psi. 2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of TSX-8510 and related components under actual fire conditions.

1Less than 1” is only available at 16psi.
2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of TSX-8510 and related components under actual fire conditions.