ThermaBase-CI™ Structural Insulation Nailbase for Exterior Walls

Rmax ThermaBase-CI™ is applied to wood framing with the insulation to the interior and wood to the exterior in order to provide a continuous layer of structural insulation for shear wall resistance as well as a suitable substrate for the mechanical attachment of many different kinds of cladding systems.

ThermaBase-CI™ is ideal for use in stud construction, new or retrofit, where a substrate is needed to support the cladding. This allows for optimum efficiency through multiple design options, ease of construction, a better building envelope and reduced energy usage. Providing a direct impact on the savings throughout the life of the building, ThermaBase-CI™ is an excellent choice for exterior residential wall design.


TYPICAL PHYSICAL PROPERTIES

Thermal Properties

1Includes 7/16” OSB                              2Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101.

1Includes 7/16” OSB                             
2Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101.

1Also, available in 25 psi upon request. Less than 1” is only available at 16 psi. 2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of Durasheath®-3, Thermasheath®-3 and related components under actual fire conditions.

1Also, available in 25 psi upon request. Less than 1” is only available at 16 psi.
2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of Durasheath®-3, Thermasheath®-3 and related components under actual fire conditions.

compliances