Rmax TSX-8500
Continuous Insulation for Exterior Walls & Exposed Use

This superior insulation product has glass fiber reinforced aluminum foil facers. The exposed side has a heavy 12mil aluminum reflective surface and is designed to provide an attractive interior finish without the need for a thermal barrier - up to 4.5” on walls or 12” on ceilings. 

 
Rmax TSX-8500 Compliances.jpg

CONSTRUCTION APPLICATIONS

  • Masonry walls
  • Exterior walls (Type I-IV)
  • Farm or storage buildings
  • Pre-engineered metal buildings
  • Parking structures
  • Laminate panels and other similar applications 
                                            Pre-Engineered Metal Building Application

                                          Pre-Engineered Metal Building Application


THERMAL PROPERTIES

 1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101.  2Includes the ASHRAE assigned 2.77 R-value of a 3/4" air tight space against a reflective foil in a typical wall assembly. 

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101. 
2Includes the ASHRAE assigned 2.77 R-value of a 3/4" air tight space against a reflective foil in a typical wall assembly. 

TYPICAL PHYSICAL PROPERTIES

 1Less than 1” is only available at 16 psi. 2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of TSX-8500 and related components under actual fire conditions.

1Less than 1” is only available at 16 psi.
2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of TSX-8500 and related components under actual fire conditions.