Rmax TSP-3
Insulation for the Building Envelope

Rmax TSP-3 is an energy-efficient thermal insulation board composed of an environmentally sound closed-cell polyiso foam core bonded to glass fiber reinforced aluminum foil facers on each side. This insulation is suitable for use in walls, ceilings and some limited roofing applications in new construction for commercial, residential, agricultural and industrial buildings and in thermal retrofit construction within existing buildings.

 
Rmax TSP-3 Compliances

CONSTRUCTION APPLICATIONS

  • Stud walls
  • Cavity walls 
  • Masonry walls
  • Exterior stucco
  • Re-siding 
  • Vaulted ceilings 
  • Attics and crawl spaces
  • Laminate panels projects
                             Cavity Wall (Brick Veneer) Application 

                             Cavity Wall (Brick Veneer) Application 


THERMAL PROPERTIES

TYPICAL PHYSICAL PROPERTIES

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101. 2Includes the ASHRAE assigned 2.77 R-value of a 3/4" dead-air space against a reflective foil in a typical wall assembly.

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101.
2Includes the ASHRAE assigned 2.77 R-value of a 3/4" dead-air space against a reflective foil in a typical wall assembly.

1Also available in 25 psi upon request 2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of TSP-3 and related components under actual fire conditions.

1Also available in 25 psi upon request
2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of TSP-3 and related components under actual fire conditions.