Rmax Re-Cover Board-3
Insulation for Above the Deck

Re-Cover Board-3 provides improved energy efficiency to many retrofit applications and comes with either glass fiber/organic mat (GRF) or coated glass fiber (CGF) facers. It may be used in recover type applications where the existing roof system, including the deck below, is still sound and firmly attached.

 
Rmax Re-Cover Board-3 Compliances

CONSTRUCTION APPLICATIONS

  • Built-up roof (BUR)
  • Modified bitumen
  • Fully adhered single ply
  • Mechanically attached single ply
  • Loose laid ballasted single ply

 

                                       Mechanically Attached Application 

                                       Mechanically Attached Application 


THERMAL PROPERTIES

1LTTR values are determined in accordance with CAN/ULC-S770. LTTR predicts a 15-year, time-weighted average.  2Re-Cover Board-3 is shipped in bundles that are approximately 48 inches high and wrapped in plastic for easy handling. 

1LTTR values are determined in accordance with CAN/ULC-S770. LTTR predicts a 15-year, time-weighted average. 
2Re-Cover Board-3 is shipped in bundles that are approximately 48 inches high and wrapped in plastic for easy handling. 

TYPICAL PHYSICAL PROPERTIES

1Also available in Grade 2 or Grade 3 upon request. 2Flame Spread and Smoke Developed Indexes are used to measure and describe the properties of this material in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of this material and other related roofing components under actual fire conditions.

1Also available in Grade 2 or Grade 3 upon request.
2Flame Spread and Smoke Developed Indexes are used to measure and describe the properties of this material in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of this material and other related roofing components under actual fire conditions.