Rmax Durasheath®-3
Building Envelope Insulation 

Durasheath®-3 offers energy performance and superior durability with its non-metallic, inorganic polymer coated glass fiber mat facers. It is intended for use in exterior walls with stucco veneer, concrete sandwich panels and many other building envelope applications, including those where an impermeable foil faced product is not desired.

 
Rmax Durasheath-3 Compliances

CONSTRUCTION APPLICATIONS

  • Stud walls
  • Cavity walls
  • Masonry walls
  • Exterior stucco
  • Re-siding
  • Vaulted-ceilings
  • Attics and crawls spaces
                                 Stucco Wall Application

                                 Stucco Wall Application


THERMAL PROPERTIES

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101.  2Durasheath-3 is shipped in bundles that are approximately 48 inches high and wrapped in plastic for easy handling. 

1Thermal values are determined by using ASTM C518 test method at 75°F mean temperature on material conditioned according to PIMA Technical Bulletin No. 101. 
2Durasheath-3 is shipped in bundles that are approximately 48 inches high and wrapped in plastic for easy handling. 

TYPICAL PHYSICAL PROPERTIES

1Also available in 25 psi upon request. Less than 1 inch is only available at 16psi. 2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of Durasheath-3 and related components under actual fire conditions.

1Also available in 25 psi upon request. Less than 1 inch is only available at 16psi.
2Flame spread and smoke numbers are shown for comparison purposes only and are not intended to represent the performance of Durasheath-3 and related components under actual fire conditions.